蘇州廢氣處理工程免費更多詳情

wutianhuan我公司是一家專業從事廢氣吸收塔設備的生產、銷售單位，主要生產有機廢氣吸收塔、聚丙烯廢氣吸收塔、酸霧吸收塔、尾氣吸收塔等吸收塔產品，以“互惠互利”為原則，以“優質、價廉”的產品和“誠信、優質”的服務為目標，竭誠歡迎八方來客光臨惠顧，精誠合作，互利雙贏。我們積累了豐富的，凝聚了大批專業技術力量，行業內部的職能與專業素質，加強同行業的橫向交流與學習，使企業更規范，工作效率更高。我們以創意的工作，穩健務實的態度，真誠熱心的服務與您共創光輝燦爛的未來。

公司一直以科技創新為導向，響應清潔生產，節能減排號召；與環保局華南科學研究所、中山大學、華南理工大學、廣東工業大學等重點科研機構和高等院校長期合作，并引進國外先進的環保技術和理念，致力于環保技術的與應用。

蘇州

設備技術介紹：
       活性炭吸附塔是一種率經濟實用型有機廢氣的凈化與治理裝置，是一種廢氣過濾吸附異味的環保設備產品。是一種廣泛應用于有機尾氣處理的工藝，如苯、醇、醚等揮發性氣體。

設備結構：

         活性炭吸附塔包含以下組成部分：

         ★主要部分含有：活性炭箱體、活性炭等

         ★配件含：沖孔板、爬梯、護欄、差壓表等

原理說明：

        由于固體表面上存在著未平衡和未飽和的分子引力或化學鍵力，因此當此固體表面與氣體時，就能吸引氣體分子，使其濃聚并保持在固體表面，此現象稱為吸附。利用固體表面的吸附能力，使廢氣與大表面的多孔性固體相，廢氣中的污染物被吸附在固體表面上，使其與氣體混合物分離，達到凈化目的。廢氣經空氣過濾器除去微小懸浮顆粒后，進入吸附塔內部，經過活性碳吸附后，除去有害成分，符合排放的凈化氣體，經風機室外。

活性炭吸附塔特點：

       ★設備面積小、運行成本低
       ★操作方便、運行可靠
       ★吸附效率高
       ★能夠同時處理多種混合有機氣體

應用行業：

        涂料行業、化學工業、食品行業、行業、電子工業、汽車行業、橡膠行業、粉體行業等 。

廢氣處理工程

光氧廢氣凈化器

光氧廢氣凈化器的產品特點：

1、除惡臭：能去除揮發性有機物（VOC）、無機物、、氨氣、硫醇類等主要污染物，以及各種惡臭味，脫臭效率高可達99%以上，脫臭效果大大超過1993年頒布的惡臭污染物排放（GB14554-93）．

2、無需添加任何：只需要設置相應的排風管道和排風動力，使惡臭氣體通過本設備進行脫臭分解凈化，無需添加任何參與化學反應。

3、適應性強：可適應高濃度，大氣量，不同惡臭氣體的脫臭凈化處理，可每天24小時連續工作，運行可靠。

4、運行成本低：本設備無任何機械，無噪音，無需專人和日常，只需作定期檢查，本設備能耗低，（每處理1000立方米/小時，僅耗電約0.2度電能），設備風阻極低＜50pa,可節約大量排風動力能耗。

5、無需預處理：惡臭氣體無需進行特殊的預處理，如加溫、加濕等,設備工作溫度在攝氏-30℃－95℃之間，濕度在30%－98%、PH值在2-13之間均可正常工作。

6、設備面積小，自重輕：適合于布置緊湊、場地狹小等特殊條件，設備面積＜1平方米/處理10000m3/h風量。

7、優質進口材料制造：防火、防腐蝕性能高，性能，使用壽命長。

光氧廢氣凈化器利用高能高臭氧UV紫外線光束分解空氣中的氧分子產生游離氧，即活性氧，因游離氧所攜正負電子不平衡所以需與氧分子結合，進而產生臭氧。

光氧廢氣凈化器的工作原理：

有足夠的能量來產生基，引發一系列復雜的物理、化學反應。由臭氧發生器作用引起的氣體有機物化學反應是在氣相中進行的電離、離解、激發、原子，分子間的相互結合及加成反應。這個能量足以使大多數氣態有機物中的化學鍵發生斷裂，從而使其降解。

從凈化空氣效率考慮，我們選擇了-C波段紫外線和臭氧發生器結合電暈電流較高化裝置采用脈沖電暈放吸附技術相結合的原理對有害氣體進行，其中-C波段紫外線主要用來去除、氨、苯、甲苯、、甲醛、、尿烷、樹脂、等氣體及。

Product characteristics of photo - oxygen exhaust gas purifier;
1. high efficiency deodorization: it can effectively remove volatile organic compounds ( VOC ), inorganic substances, hydrogen sulfide, ammonia, mercaptans and other major pollutants, as well as all kinds of malodor, the deodorization efficiency can reach more than 99 %, the deodorization effect is much more than the national malodor pollutant discharge standard promulgated in 1993 ( gb14554 - 93 ).

2. no substances need to be added: only the corresponding exhaust pipeline and exhaust power need to be set, so that the malodorous gas can be deodorized, decomposed and purified through the equipment, and no substances need to be added to participate in chemical reaction.
3. strong adaptability: it can adapt to the deodorization and purification treatment of high concentration, air volume and different malodorous gas substances, can work continuously 24 hours a day, and has stable and reliable operation.

4. low operation cost: the equipment has no mechanical action, no noise, no need of personnel management and daily maintenance, only needs to be checked regularly, and the energy consumption of the equipment is low ( power consumption is only about 0.2 degrees per 1000 cubic meters / hour per treatment ), the wind resistance of the equipment is extremely low < 50 pa, and a large amount of exhaust power energy consumption can be sed.
5. no pretreatment is required: the odor gas does not need special pretreatment, such as heating, humidification and the like, the working environment temperature of the equipment is between - 30 deg c and 95 deg c, the humidity is between 30 percent and 98 percent, and the ph value is between 2 percent and 13 percent.
6. the equipment covers an area of less than 1 m2 / 10,000 m3 / h air volume, which is suitable for special conditions such as compact layout and narrow site.
7. manufacture of high quality imported materials: high fire and corrosion resistance, stable performance and long service life.
The photo-oxygen exhaust gas purifier decomposes oxygen molecules in the air by using high-energy and high-ozone UV light beams to generate free oxygen, namely active oxygen, which needs to be combined with oxygen molecules due to the imbalance of positive and negative electrons carried by the free oxygen, thereby generating ozone.
Working principle of optical oxygen exhaust gas purifier;

There is enough energy to generate free radicals to initiate a series of complex physical and chemical reactions. The gas organic chemical reaction caused by the action of ozone generator is ionization, dissociation, excitation, atomic, intermolecular bonding and addition reaction in the gas phase. This energy is sufficient to break chemical bonds in most gaseous organics and degrade them.
In view of air purification efficiency, we chose - c - band ultriolet and ozone generator combined corona current higher device to eliminate harmful gases, which - c - band ultriolet is mainly used to remove hydrogen sulfide, ammonia, benzene, toluene, xylene, formaldehyde, acetone, urethane, resin, and other gases and sterilization.