CMC-E46N電焊條

特別適合用于深抽模具的R角修復與高硬度之拉延部位制作。可直接焊補于鑄鐵模具GGG70L、FCD、GM241等…熔金細密、具極高的耐磨硬度、易拋光。屬高效焊條(熔填率 120%)球墨鑄鐵、灰口鑄鐵與火焰淬火鑄鋼也可直接堆焊。   CMC-E46N HRC 45-48 2.4, 3.2   直接在鑄鐵上施焊，對于沖壓模的金屬磨耗非常有效。焊接金屬第一層為奧氏體組織；從2層開始為馬氏體組織耐磨耗性好�；鹧娲慊痂T鐵也可直接堆焊。   CMC-E46H HRC 44-49 3.2*350mm   特別適合用于鉬鉻鑄鐵模具的R角修復與拉延部位制作。熔金細密、易拋光可防止鈑件的刮傷；硬度高，適用于高要求的拉延筋制造。球墨鑄鐵、灰口鑄鐵與火焰淬火鑄鋼也可直接堆焊。

UTP 673工模具焊條

特 性	Cr Mo W V多元合金鋼耐磨堆焊材料,通過熱處理可調整堆焊金屬的硬度,耐熱到550℃. Cr Mo w. v. multivariate alloy wear-resistant overlaying welding materials, heat treatment can be adjusted by the hardness and resistance buttering metal 550 degrees Celsius.
用 途	用于堆焊冷作熱作工具,模具.如壓鑄模具,鍛造工具 熱修整工具和冷切刀,可堆焊在低合金鋼上制成工具. Used for surfacing cold ReZuo tool, die casting die forging. Such as heat, cold and tool grinding tools, cutting knife can be made in the low alloy steel # tools.
規 格	2.6￠ 3.2￠ 4.0￠

CARBO 6W各種刃口堆焊使用

特 性	高鉻成份,耐磨耗耐龜裂性能優良,焊后硬度較高,機械加工困難. High chrome component, abrasion resistance, resistance to crack excellent performance after welding, machining difficulty high hardness.
用 途	淬火硬化模具鋼刃口的修補,適用于SKD11合金工具鋼,淬火后的模具鋼修補. Quench hardened steel blade of repair, applicable to SKD11 alloy steel, alloy after quenching repair.
規 格	2.6￠ 3.2￠ 4.0￠

TM-2000模具硬化堆焊用

特 性	對沖壓模的金屬磨耗非常有效,焊金第一次為奧氏體組織,第二層為高硬度的馬氏體組織.火焰淬火鋼也可以直接堆焊. The metal stamping mould for abrasion is very effective for the first time, welding gold austenitic organization, the second is the high hardness martensite steel quenching. Flame may also directly hardfacing.
用 途	直接堆焊各種鑄鐵材的模具. All sorts of cast iron material directly surfacing of mould.
規 格	2.6￠ 3.2￠ 4.0￠ 5.0￠

GNK-8C打底焊條

特 性	高鉻成份,焊金具有高拉力,高韌性 HB-280. High chrome component, high strength, welding gold high toughness HB - 280.
用 途	鑄鋼模硬面制做打底緩沖層,裂縫敏感度較高的特種鋼接合襯焊使用. Cast steel hardfaced making render buffer layer, crack sensitive use of special steel lining welding joints.
規 格	2.6￠ 3.2￠